technical data sheet adaptor rpc2.40 jack C rpcn plug 09KR105-S0AS3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/06.07/5.0 all dimensions are in mm; tolerances according to i so 2768 mh interface rpc2.40 according to iec 6116940 rpcn according to iec 6116916 ; cecc 22 210 ; mil std 348a/402 rpc2.40 mechanically compatible with rpc1.85 documents n/a material and plating connector parts material plating center contact cube gold, min. 1.27 m, over chemic al nickel outer contact stainless steel passivated coupling nut stainless steel passivated dielectric ppe/ptfe
technical data sheet adaptor rpc2.40 jack C rpcn plug 09KR105-S0AS3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 180 page p.o.box 1260 d84526 tittmoning germany fa x: +49 8684 18499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/06.07/5.0 f(ghz) electrical data impedance 50 w frequency dc to 18 ghz return loss 3 26 db, dc to 18 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance rpcn 1.0 m w outer contact resistance rpcn 1.0 m w center contact resistance rpc2.40 4.0 m w outer contact resistance rpc2.40 2.5 m w test voltage 500 v rms working voltage 150 v rms rfleakage 3 100 db up to 1 ghz mechanical data mating cycles 3 500 center contact captivation 3 28 n coupling test torque rpcn 1.70 nm recommended torque rpcn 0.70 nm to 1.10 nm coupling test torque rpc2.40 1.65 nm recommended torque rpc2.40 0.80 nm to 1.10 nm recommended torque ruggedized nut 1.36 nm environmental data temperature range 40c to +85c thermal shock milstd202, method 107, condition b corrosion milstd202, method 101, condition b vibration milstd202, method 204, condition d shock milstd202, method 213, condition i moisture resistance milstd202, method 106 2002/95/ec (rohs) compliant tooling n/a suitable cables n/a packing standard 1 pce in box weight 72.1 g/pce draft date approved date rev. engineering change n umber name date marek singer 01/02/12 martin moder 12/04/12 a00 12 -s173 t. oberhauser 12/04/12 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warranty on our part a nd no statement herein shall be construed as recomm endation to infringe existing patents. in the effor t to improve our products, we reserve the right to make changes judg ed to be necessary.
|
